1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips

1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips

Introduction of 1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips:

1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips is a standard and universal linear-motion vibration type sieving equipments. With low power consumption, large output, simple structure,easy maintenance, fully enclosed structure, no dust, automatic nesting, more suitable for pipeline operations. The linear vibro sifter is the efficient new screening equipment widely used in food, refractory materials, building materials, mining, coal, metallurgy, light industry, chemical industry etc..

Technical Parameters of 1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips:

Note: The data in the table are for reference only. Our company reserve the right to modify the above data.

Characteristics of 1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips:

1. Movable screening process
At the same time of screening, the material has been transported over long distances.

2. Easy to repace screens and parts
Using a special grid structure design, the screens and parts can be easily changed and tighten.

3. High capacity and Friendly working space
With excellent structuer of machine and motors, the output is very high and working noise is low.

4. High sieving precision
The material has a long stroke on the screen surface, high screening precision and large processing capacity.

5. Flexible machine structures
Different shapes and structures can be designed according to the production site.

6. Suitable for different screening sizes
Change the screen spacing and inclination according to material size, permeability probability and productivity

7. Low maintenance cost and long service time
All parts of the screen body are welded properly with excellent steel plates,and the overall rigidity is good, firm and reliable for very long time.

8. Good sealing and minimal dust spillage
Fully enclosed structure, automatic discharge lead to nearly zero rate of dust spillage.

Important Information About 1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips:

Working Principle of 1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips:

   The rectangular vibrating sifter adopts vibration motor excitation as the source of vibration, so that the material was tossed in the sieve,while forward in a straight line material evenly into the screening machine feeder feed port, multi-layer mesh specifications of sieve, sieve material, respectively, discharged from their exports.

   There are two ways to install the vibration motor of the linear vibrating sifter:

1. Bottom mounted: Installed below (common used)

2. Bilateral: Installed on both sides

Structural Composition of 1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips:

The rectangular vibrating screens are mainly composed of screen box, screen frames, screen, vibration motor, electric pedestal, damping spring, frame and so on.

1. Screen Mesh: the screen mesh is perforated plate. The overall stiffness is good, solid and reliable.

2. Screen box: welded by steel plate, with certain strength and rigidity, it is the main component of screen machine.

3. Vibration damping spring: to prevent vibration from passing to the ground and support the full weight of the screen box. When installing, the spring must be perpendicular to the ground.
4. Motor pedestal: the motor pedestal of the down vibration type of sieve machine (the motor is installed under the sieve box) can be moved. The connecting screw must be tightened before using, Especially the new screening machine must be repeatedly tightened three days before trial, so as to avoid accidents caused by loosening.

5. Vibration motor: the vibration motor use and maintenance method to see the vibration motor operating instructions.
6. Brackets: the bracket is used to support the screen box. It must be mounted perpendicular to the ground during installation. The bracket and sieve body part shall be joined by the compression spring.

Application of 1500*4500mm Multi-Deck Rectangular Vibrating Separator For Wood Chips:

1. Mining industry: kaolin, alumina, carbon, quartz sand,titanium oxide, zinc oxide, etc.

2. Food industry: jelly bean, sugar, salt, milk powder, yeast powder, alkali, gourmet powder, starch, pollen, food additive, bean milk, juice, etc.
3. Chemical industry: medicine, grease, resin, pigment, paint, palette, cosmetic, etc.

4. Metallurgy industry: aluminum powder, lead powder, copper powder, ore, alloy powder ,electrode powder, manganese dioxide, electrolytic copper powder, electric magnetic material, polishing powder, refractory material, etc.

5. Mechanical industry: powder metallurgy, casting sand, electromagnetic material and metal powder, etc.
6. Paper-making industry: coated slurry, exhaust liquid, paper making liquid and waste water reclamation, etc.
7. Abrasive material and ceramic industry: mica, alumina, abrasive, refractory material, slurry, building sand, etc.
8. Pollution treatment: waste oil, waste water,additives, activated carbon,etc.

Contact: Ms. Magie

E-mail: sale@aarealmachine.com

             magiecn@gmail.com

WhatsApp/WeChat: 0086-15637361027

Website: https://www.aarealmachine.com